Fujitsu ETERNUS DX60 S3 User Manual page 1012

Appendix B Factory Default List
B.6 Advanced Copy Management
■ Modify REC Multiplicity
Screen
Remote Box ID List
Remote Box ID List
Advanced Setting
■ Set REC Bandwidth Limit
Screen
Bandwidth Limit Settings
■ ODX
Screen
Enable ODX
Disable ODX
*1: The ODX function is disabled by default and only the [Enable ODX] function is available.
Setting item
Priority Level
Specification Mode
Multiplicity
Copy Schedule Mode
Setting item
Setting Mode
Bandwidth Limit
Setting item
Operation mode
1012
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
Default value
•
When the local storage system and the remote
storage system are connected by direct
connection
Automatic
•
When the local storage system and the remote
storage system are connected by remote
connection
"-" (hyphen)
•
When the local storage system and the remote
storage system are connected by remote
connection
Automatic
•
When the local storage system and the remote
storage system are connected by direct
connection
"-" (hyphen)
•
When the local storage system and the remote
storage system are connected by remote con-
nection and "Manual" is selected for the
specification mode
1
•
When the local storage system and the remote
storage system are connected by remote con-
nection and "Automatic" is selected for the
specification mode
"-" (hyphen)
•
When the local storage system and the remote
storage system are connected by direct
connection
"-" (hyphen)
Session Balancing
Default value
Set the same Bandwidth Limit for all paths
0 (Mbit/s): Unlimited
Default value
Disable (*1)
P2X0-1270-13ENZ0