Data Migration; Storage Migration; Figure 51 Storage Migration - Fujitsu ETERNUS DX60 S4 Design Manual

1. Function

Data Migration

Data Migration

Storage Migration

Storage Migration is a function that migrates the volume data from an old storage system to volumes in a new
storage system without using a host in cases such as when replacing a storage system.
The migration source storage system and migration destination ETERNUS DX are connected using FC cables. Da-
ta read from the target volume in the migration source is written to the migration destination volume in the
ETERNUS DX.
Since Storage Migration is controlled by ETERNUS DX controllers, no additional software is required.
The connection interface is FC. In addition, the direct connection and switch connection topologies are suppor-
ted.
Online Storage Migration and offline Storage Migration are supported.
Offline method
•
Stop the server during the data migration. Host access becomes available after the data migration to the mi-
gration destination volume is complete. Therefore, this method prevents host access from affecting the ETER-
NUS DX and can shorten the time of the migration. This method is suitable for cases requiring quick data mi-
gration.
Online method
•
Host access becomes available after the data migration to the migration destination volume starts. Operations
can be performed during the data migration. Therefore, this method can shorten the time for the stopped op-
eration. This method is suitable for cases requiring continued host access during the data migration.

Figure 51 Storage Migration

The source storage system
The Storage Migration function migrates whole volumes at the block level. A data migration can be started by
specifying a text file with migration information that is described in a dedicated format from ETERNUS Web GUI.
The path between the migration source and the migration destination is called a migration path. The maximum
number of migration volumes for each migration path is 512.
Up to 16 migration source devices can be specified and up to eight migration paths can be created for each mi-
gration source device.
The capacity of a volume that is to be specified as the migration destination area must be larger than the migra-
tion source volume capacity.
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Design Guide (Basic)
ETERNUS DX
FC
Storage Migration
83
Copyright 2019 FUJITSU LIMITED
P3AM-8992-14ENZ0