Table of Contents
Advertisement
Inspection
Remove the timing belt (81881 engine: see page 6-
1 0 , B ' l 8 C l , 8 1 8 C 5 e n g i n e s : s e e p a g e 6 - 4 8 ) .
Tu.n the water pump pulley counterclockwise.
Check that it turn freely.
Check for sign6 of seal leakage.
NOTE: A small amount of "weeping" trom the
bleed hole is normal.
BLEED HOLE
Remove the timing belt (81881 engine: see page 6-
1 0 , 8 1 8 C 1 , B l 8 C 5 e n g i n e s : s e e p a g e 6 - 4 8 ) .
Remove the camshaft pulleys and the back cover
( B ' 1 8 8 1 e n g i n e : s e e p a g e 6 - 2 0 , 8 1 8 C 1 , 8 1 8 C 5
engines: see page 6-60).
Remove the water pump by removing flve bolts.
NOTE: Inspect, repair and clean the O-ring groove
and mating surface with the cylinder block,
Replacement
6 x 1 . 0 m m
1 2 N . m 1 1 . 2 k g t . m ,
8.7 tbf.tt)
4.
Install the water pump in the reverse order of
removal.
a Keep the O-ring in position when installing.
a Clean the spilled engine coolant.
BLEED HOL€
1 0 - 1 1
Advertisement
Table of Contents
Troubleshooting
