Engine Coolant Refilling And Bleeding - Acura Integra 1998 Service Manual

Radiator
Engine Coolant Refilling and Bleeding
CAUTION: When pouring engine coolant, be sure to shut
th6 relay box lid and not to l€t coolant spill on th6 el€c-
trical parts or the paint. lf any coolant spills, rinse it off
immediately.
1. Slide the heater temDerature control lever to maxi-
m u m h e a t .
Make sure the engine and radiator are cool to the
t o u c h .
2. Remove the radiator cap.
3.
Loosen the drain plug, and drain the coolant.
4. Remove the drain bolt from the cvlinder block.
j i
I
i '
l:ll
ENGINE DRAIN EOLT
78 N.m {8.0 kgt'm,54 lbt.ft)
Apply liquid gasket to
bolt thread when installing.
WASHER
Replace.
1 0 - 6
5. Apply liquid gasket to the drain bolt threads, then
reinstall the bolt with a new washer and tighten it
securely.
6. Tighten the radiator drain plug securely.
7. Remove, drain and reinstall the reservoir. Fillthe tank
halfway to the MAX mark with water, then up to
MAX mark with antifreeze.
COOLANT
RESERVOIR
I
I
I