Show Fex Transceiver - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show fex transceiver

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show fex transceiver
To display information about the transceiver connecting a Fabric Extender to the Cisco Nexus 5000
Series switch, use the show fex transceiver command.
Syntax Description chassis_ID
calibration
detail
Command Default None
Command Modes EXEC mode
Command History Release
4.0(1a)N2(1)
Examples This example shows how to display information about the transceiver connecting a Fabric Extender to
the Cisco Nexus 5000 Series switch:
switch# show fex transceiver
Related Commands Command
fex
Cisco Nexus 5000 Series Command Reference
4-16
show fex chassis_ID transceiver [calibration | detail]
Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
(Optional) Displays detailed calibration information about the transceiver.
(Optional) Displays detailed diagnostic information about the transceiver.
Modification
This command was introduced.
Description
Creates a Fabric Extender and enters Fabric Extender configuration mode.
Chapter 4 Fabric Extender Commands
OL-16599-01