Ip Igmp Snooping (Exec) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

ip igmp snooping (EXEC)

To enable Internet Group Management Protocol (IGMP), use the ip igmp snooping command. To
disable IGMP snooping, use the no form of this command.
Syntax Description
This command has no other arguments or keywords.
Command Default IGMP snooping is enabled.
If the global setting is disabled, then all VLANs are treated as disabled, whether they are enabled or not.
Note
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to enable IGMP snooping:
switch# ip igmp snooping
Related Commands Command
show ip igmp snooping
OL-16599-01
ip igmp snooping
no ip igmp snooping
Modification
This command was introduced.
Description
Displays IGMP snooping information and configuration.
Cisco Nexus 5000 Series Command Reference
ip igmp snooping (EXEC)
2-23