Logging Distribute - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

logging distribute

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
logging distribute
To enable Cisco Fabric Services (CFS) distribution for logging, use the logging distribute command.
To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the logging commit command.
Examples The following example shows how to change the distribute logging configuration changes:
switch(config)# logging distribute
Related Commands Command
logging commit
show logging
Cisco Nexus 5000 Series Command Reference
8-98
logging distribute
no logging distribute
Modification
This command was introduced.
Description
Commits the logging configuration changes to the active configuration.
Displays logging information.
Chapter 8 Fibre Channel Commands
OL-16599-01