Show Topology - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show topology

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show topology
To display topology information for connected SAN switches, use the show topology command.
Syntax Description
vsan vsan-id
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays topology information:
switch# show topology
Cisco Nexus 5000 Series Command Reference
9-46
show topology [vsan vsan-id]
(Optional) Displays information for a VSAN. The range is 1 to 4093.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01