Show Running-Config Vpc - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 10 Vpc Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show running-config vpc

To display the running configuration information for virtual port channels (vPCs), use the show
running-config vpc command.
Syntax Description[ all
Defaults
None
Command Modes Any command mode.
Command History Release
4.1(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the running configuration for a vPC:
switch (config)# show running-config vpc
version 4.1(2)
feature vpc
vpc domain 2
role priority 1
system-priority 32667
peer-keepalive destination 10.10.76.52 source 10.10.76.51 udp-port 3200 vrf ma
engagement interval 1000 timeout 5
interface port-channel10
vpc 20
interface port-channel101
vpc 101
interface port-channel200
vpc peer-link
interface port-channel201
vpc 201
Related Commands Command
show vpc brief
OL-16599-01
show running-config vpc [all]
(Optional) Displays running configuration for vPC with defaults.
Modification
This command was introduced.
Description
Displays information about vPCs. If the feature is not enabled, this
command returns an error.
show running-config vpc
Cisco Nexus 5000 Series Command Reference
10-3