Show Scsi-Target - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show scsi-target

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show scsi-target
To display information about existing SCSI target configurations, use the show scsi-target command.
Syntax Description auto-poll
custom-list
devices
vsan vsan-range
fcid fcid-id
disk
lun
os
aix
all
hpux
linux
solaris
windows
pwwn
status
tape
Command Default
None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines
Use the show scsi-target auto-poll command to verify automatic discovery of online SCSI targets.
Examples
The following example displays the status of a SCSI discovery:
switch# show scsi-target status
Cisco Nexus 5000 Series Command Reference
9-44
show scsi-target {auto-poll | custom-list | devices [vsan vsan-id] [fcid fcid-id] | disk [vsan
vsan-id] [fcid fcid-id] | lun [vsan vsan-id] [fcid fcid-id] [os [aix | all | hpux | linux | solaris |
windows] | pwwn | status | tape [vsan vsan-id] [fcid fcid-id] | vsan vsan-id}
Displays SCSI target auto polling information.
Displays customized discovered targets.
Displays discovered SCSI target devices information
(Optional) Specifies the VSAN ID or VSAN range. The range is 1 to 4093.
(Optional) Specifies the FCID of the SCSI target to display.
Displays discovered disk information.
Displays discovered SCSI target LUN information.
(Optional) Discovers the specified operating system.
(Optional) Specifies the AIX operating system.
(Optional) Specifies all operating systems.
(Optional) Specifies the HPUX operating system.
(Optional) Specifies the Linux operating system.
(Optional) Specifies the Solaris operating system.
(Optional) Specifies the Windows operating system.
Displays discovered pWWN information for each operating system.
Displays SCSI target discovery status.
Displays discovered tape information.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01