Fcinterop Fcid-Allocation - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcinterop fcid-allocation

To allocate FCIDs on the switch, use the fcinterop fcid-allocation command. To disable FCIDs on the
switch, use the no form of the command.
Syntax Description
auto
flat
none
Command Default The default is automatic allocation of FCIDs.
Command Modes
Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines This command defines how the switch assigns FCIDs.
Examples
The following example sets the FCID allocation to flat:
switch(config)# fcinterop fcid-allocation flat
Related Commands Command
show flogi database
OL-16599-01
fcinterop fcid-allocation {auto | flat | none}
no fcinterop fcid-allocation {auto | flat | none}
Assigns single FCID to compatible HBAs.
Assign single FCID.
Assigns FCID range.
Modification
This command was introduced.
Description
Displays the fabric login (FLOGI) table.
Cisco Nexus 5000 Series Command Reference
fcinterop fcid-allocation
8-57