Show Class-Map Type Queuing - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 5 Quality of Service Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show class-map type queuing

To display type queuing class maps, use the show class-map type queuing command.
Syntax Description
class-map-name
Defaults Displays all type queuing class maps if no class map name is specified.
Command Modes Any command mode
Command History Release
4.1(3)N1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display all type queuing class maps:
switch(config)# show class-map type queuing
Related Commands Command
class-map
OL-16599-01
show class-map type queuing [class-map-name]
Named class map.
Modification
This command was introduced.
Description
Creates or modifies a class map.
show class-map type queuing
Cisco Nexus 5000 Series Command Reference
5-21