Port-Security Database - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

port-security database

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
port-security database
To copy the port security database or to view the difference within the port security database, use the
port-security database command.
Syntax Description copy
diff
active
config
vsan vsan-id
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines If the active database is empty, the port-security database is empty. Use the port-security database diff
active command to resolve conflicts.
Examples The following example copies the active to the configured database:
switch# port-security database copy vsan 1
The following example provides the differences between the active database and the configuration
database:
switch# port-security database diff active vsan 1
The following example provides information on the differences between the configuration database and
the active database:
switch# port-security database diff config vsan 1
Cisco Nexus 5000 Series Command Reference
8-112
port-security database {copy | diff {active | config}} vsan vsan-id
Copies the active database to the configuration database.
Provides the difference between the active and configuration port security
database.
Writes the active database to the configuration database.
Writes the configuration database to the active database.
Specifies the VSAN ID. The ranges is 1 to 4093.
Modification
This command was introduced.
Chapter 8 Fibre Channel Commands
OL-16599-01