Spanning-Tree Mst Max-Age - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

spanning-tree mst max-age

To set the max-age timer for all the instances on the switch, use the spanning-tree mst max-age command.
To return to the default settings, use the no form of this command.
Syntax Description
seconds
Command Default
20 seconds.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines This parameter is used only by Instance 0 or the IST.
This command does not require a license.
Examples This example shows how to set the max-age timer:
switch(config)# spanning-tree mst max-age 40
Related Commands Command
show spanning-tree
mst
OL-16599-01
spanning-tree mst max-age seconds
no spanning-tree mst max-age
Number of seconds to set the max-age timer for all the instances on the
switch; the range of valid values is from 6 to 40 seconds.
Modification
This command was introduced.
Description
Displays the information about the MST protocol.
spanning-tree mst max-age
Cisco Nexus 5000 Series Command Reference
2-63