Show Install All - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show install all

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show install all
To display information related to the operation of the install all command, use the show install all
command.
Syntax Description failure-reason
impact
kickstart
system
status
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to display the installation failure reason:
switch# show install all failure-reason
This example shows how to display the impact of installing new images:
switch# show install all impact
This example shows how to display the status of the software installation process:
switch# show install all status
Related Commands Command
install all
show boot
Cisco Nexus 5000 Series Command Reference
1-86
show install all {failure-reason | impact [kickstart | system] | status}
Displays the software installation failure reason.
Displays the impact of installing the images referred to in the boot variables.
(Optional) Displays the impact of installing the kickstart image referred to
in the kickstart boot variable.
(Optional) Displays the impact of installing the system image referred to in
the kickstart boot variable.
Displays the status of the software installation process.
Modification
This command was introduced.
Description
Installs the software on the physical device.
Displays the boot variable configuration.
Chapter 1 Basic System Commands
OL-16599-01