Debug Logging - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

debug logging

To enable debug command output logging, use the debug logging command. To disable debug logging,
use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled.
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to enable the output logging for the debug command:
switch# debug logging
This example shows how to disable the output logging for the debug command:
switch# no debug logging
Related Commands Command
debug logfile
OL-16599-01
debug logging
no debug logging
Modification
This command was introduced.
Description
Configures the log file for the debug command output.
Cisco Nexus 5000 Series Command Reference
debug logging
1-27