System Cores - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

system cores

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
system cores
To configure the destination for the system core, use the system cores command. To revert to the default,
use the no form of this command.
Syntax Description
tftp:
tftp_URL
vrf management
Command Default None
Command Modes
Interface configuration mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to configure a core file:
switch# configure terminal
switch(config)# system cores tftp://serverA:69/core_file
This example shows how to disable system core logging:
switch# configure terminal
switch(config)# no system cores
Related Commands Command
show system cores
Cisco Nexus 5000 Series Command Reference
1-114
system cores tftp:tftp_URL [vrf management]
no system cores
Specifies a TFTP server.
The URL for the destination file system and file. Use the following format:
[//server[:port]][/path/]filename
(Optional) Specifies to use the default virtual routing and forwarding (VRF).
Modification
This command was introduced.
Description
Displays the core filename.
Chapter 1 Basic System Commands
OL-16599-01