Spanning-Tree Mst Max-Hops - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

spanning-tree mst max-hops

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
spanning-tree mst max-hops
To specify the number of possible hops in the region before a bridge protocol data unit (BPDU) is discarded,
use the spanning-tree mst max-hops command. To return to the default settings, use the no form of this
command.
Syntax Description
hop-count
Command Default
20 hops.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to set the number of possible hops:
switch(config)# spanning-tree mst max-hops 25
Related Commands Command
show spanning-tree
mst
Cisco Nexus 5000 Series Command Reference
2-64
spanning-tree mst max-hops hop-count
no spanning-tree mst max-hops
Number of possible hops in the region before a BPDU is discarded; the range of valid
values is from 1 to 255 hops.
Modification
This command was introduced.
Description
Displays the information about the MST protocol.
Chapter 2 Ethernet Commands
OL-16599-01