Member (Fcalias Configuration Mode) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual
Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)
Hide thumbs
Also See for AP775A - Nexus Converged Network Switch 5010:
- Configuration manual (1486 pages) ,
- Reference (886 pages) ,
- Release note (26 pages)
Table of Contents
Advertisement
Chapter 8
Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
member (fcalias configuration mode)
To add a member name to a Fibre Channel alias on a VSAN, use the member command. To remove a
member name from a Fibre Channel alias, use the no form of the command.
Syntax Description
device-alias aliasname
domain-id domain-id
fcid fc-id
fwwn fwwn-id
interface fc slot/port
swwn swwn-id
port-number
port-number
pwwn pwwn-id
symbolic-nodename
nodename
Command Default
None
Command Modes
Fcalias configuration mode
Command History
Release
4.0(0)N1(1a)
Examples
The following example shows how to add a member to an alias called samplealias:
switch(config)# fcalias name samplealias
The following example defines a Fibre Channel interface for the member:
switch(switch(config-fcalias)# member interface fc3/1
OL-16599-01
member {device-alias aliasname | domain-id domain-id port-number port-number | fcid fc-id |
fwwn fwwn-id | interface fc slot/port [domain-id domain-id | swwn swwn-id] | pwwn pwwn-id
| symbolic-nodename nodename}
no member {device-alias aliasname | domain-id domain-id port-number port-number | fcid fc-id
| fwwn fwwn-id | interface fc slot/port [domain-id domain-id | swwn swwn-id] | pwwn pwwn-id
| symbolic-nodename nodename}
Specifies the member device alias. Maximum length is 64 characters.
Specifies the member domain ID. The range is 1 to 239.
Specifies the member FC ID. The format is 0xhhhhhh, where h is a
hexadecimal digit.
Specifies the member fWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Specifies the member interface ID.
(Optional) Specifies the member sWWN ID. The format is
hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal digit.
Specifies a port number in the range of 0 to 255.
Specifies the member pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Specifies the member symbolic node name. The maximum length is
255 characters.
Modification
This command was introduced.
member (fcalias configuration mode)
Cisco Nexus 5000 Series Command Reference
8-99
Advertisement
Table of Contents
