Radius-Server Directed-Request - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

radius-server directed-request

To allow users to send authentication requests to a specific RADIUS server when logging in, use the
radius-server directed request command. To revert to the default, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Sends the authentication request to the configured RADIUS server group.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can specify the username@vrfname:hostname during login, where vrfname is the VRF to use and
hostname is the name of a configured RADIUS server. The username is sent to the RADIUS server for
authentication.
Examples
This example shows how to allow users to send authentication requests to a specific RADIUS server
when logging in:
switch(config)# radius-server directed-request
This example shows how to disallow users to send authentication requests to a specific RADIUS server
when logging in:
switch(config)# no radius-server directed-request
Related Commands Command
show radius-server
directed-request
OL-16599-01
radius-server directed-request
no radius-server directed-request
Modification
This command was introduced.
Description
Displays the directed request RADIUS server configuration.
radius-server directed-request
Cisco Nexus 5000 Series Command Reference
6-81