fcalias clone
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fcalias clone
To clone a Fibre Channel alias, use the fcalias clone command.
Syntax Description
origFcalias-Name
cloneFcalias-Name
vsan
vsan-id
Command Default
None
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
To disable a Fibre Channel alias, use the no form of the fcalias name command.
Examples
The following example shows how to clone a fcalias named origAlias to cloneAlias on VSAN 45:
switch(config)# fcalias clone origAlias cloneAlias vsan 45
Related Commands
Command
show fcalias
Cisco Nexus 5000 Series Command Reference
8-44
fcalias clone origFcalias-Name cloneFcalias-Name vsan vsan-id
Clones a Fibre Channel alias from the current name to a new name.
Maximum length of names is 64 characters.
The clone Fibre Channel alias is for a VSAN.
The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Displays the member name information in a Fibre Channel alias (fcalias).
Chapter 8
Fibre Channel Commands
OL-16599-01