Gunzip - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

gunzip

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
gunzip
To uncompress a compressed file, use the gunzip command.
Syntax Description
filesystem:
//server/
directory
filename
There can be no spaces in the filesystem://server/directory/filename string. Individual elements of this
Note
string are separated by colons (:) and slashes (/).
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines The compressed filename must have the .gz extension.
The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.
Examples This example shows how to uncompress a compressed file:
switch# gunzip run_cnfg.cfg.gz
Related Commands Command
dir
gzip
Cisco Nexus 5000 Series Command Reference
1-46
gunzip [filesystem:] [//server/] [directory] filename
(Optional) Name of the file system. Valid values are bootflash, modflash,
or volatile.
(Optional) Name of the server. Valid values are ///, //module-1/, //sup-1/,
//sup-active/, or //sup-local/. The double slash (//) is required.
(Optional) Name of a directory. The directory name is case sensitive.
Name of the file to uncompress. The filename is case sensitive.
Modification
This command was introduced.
Description
Displays the directory contents.
Compresses a file.
Chapter 1 Basic System Commands
OL-16599-01