Show Fcdomain - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show fcdomain

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show fcdomain
To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command.
Syntax Description address-allocation
cache
allowed
domain-list
fcid persistent
pending
pending-diff
session-status
vsan vsan-id
statistics
interface
fc slot/port
san-port-channel port
status
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines When you enter the show fcdomain with no arguments, all VSANs are displayed. The VSANs should be
active or you will get an error.
Cisco Nexus 5000 Series Command Reference
9-12
show fcdomain [address-allocation [cache] | allowed | domain-list | fcid persistent [unused] |
pending [vsan vsan-id] | pending-diff [vsan vsan-id] | session-status [vsan vsan-id] | statistics
[interface {fc slot/port [vsan vsan-id] } | san-port-channel port [vsan vsan-id]] | status | vsan
vsan-id]
(Optional) Displays statistics for the FC ID allocation.
(Optional) Reassigns the FC IDs for a device (disk or host) that exited and
reentered the fabric for the principal switch. In the cache content, VSAN
refers to the VSAN that contains the device, WWN refers to the device that
owned the FC IDs, and mask refers to a single or entire area of FC IDs.
(Optional) Displays a list of allowed domain IDs.
(Optional) Displays a list of domain IDs provided by the principal switch.
(Optional) Displays persistent FC IDs (across reboot).
(Optional) Displays the pending configuration.
(Optional) Displays the difference between the running configuration and
the pending configuration.
(Optional) Displays the last action performed by FC domain.
(Optional) Specifies a VSAN ID. The range is 1 to 4093.
(Optional) Displays the statistics of FC domain.
(Optional) Specifies an interface.
(Optional) Specifies a Fibre Channel interface.
(Optional) Specifies a SAN port channel interface. The range is 1 to 128.
(Optional) Displays all VSAN-independent information in FC domain.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01