Show Mac-Address-Table - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show mac-address-table

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show mac-address-table
To display the information about the MAC address table, use the show mac-address-table command.
Syntax Description address mac-address
dynamic
interface type slot/port |
port-channel number
multicast
static
vlan vlan-id
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
The switch maintains static MAC address entries that are saved in its startup configuration across reboots
and flushes the dynamic entries.
Examples
This example shows how to display the information about the entries for the MAC address table:
switch# show mac address-table
This example shows how to display the information about the entries for the MAC address table for a
specific MAC address:
switch# show mac address-table address 0018.bad8.3fbd
This example shows how to display the information about the dynamic entries for the MAC address
table:
switch# show mac address-table dynamic
Cisco Nexus 5000 Series Command Reference
3-12
show mac-address-table [address mac-address] [dynamic | multicast | static] [interface {type
slot/port | port-channel number}] [vlan vlan-id]
(Optional) Displays information about a specific MAC address.
(Optional) Displays information about the dynamic MAC address table
entries only.
(Optional) Specifies the interface. Use either the type of interface, the slot
number, and the port number, or the EtherChannel number.
(Optional) Displays information about the multicast MAC address table
entries only.
(Optional) Displays information about the static MAC address table entries
only.
(Optional) Displays information for a specific VLAN; the range of valid
values is from 1 to 4094.
Modification
This command was introduced.
Chapter 3 Ethernet Show Commands
OL-16599-01