show npv traffic-map
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show npv traffic-map
To display N port virtualization (NPV) traffic maps, use the show npv traffic-map command.
Syntax Description
This command has no other keywords or arguments.
Command Default
None
Command Modes
EXEC mode.
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
The show npv traffic-map command is available only when the switch is in NPV mode.
Examples
The following example displays the current status of NPV:
switch# show npv traffic-map
Related Commands
Command
show npv flogi-table
Cisco Nexus 5000 Series Command Reference
9-36
show npv traffic-map
Modification
This command was introduced.
Description
Displays the information about NPV FLOGI session.
Chapter 9
Fibre Channel Show Commands
OL-16599-01