Show Accounting Log - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show accounting log

To display the accounting log contents, use the show accounting log command.
Syntax Description size
start-time year month
day HH:MM:SS
end-time year month
day HH:MM:SS
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to display the entire accounting log:
switch# show accounting log
This example shows how to display 400 bytes of the accounting log:
switch# show accounting log 400
This example shows how to display the accounting log starting at 16:00:00 on February 16, 2008:
switch# show accounting log start-time 2008 Feb 16 16:00:00
This example shows how to display the accounting log starting at 15:59:59 on February 1, 2008 and
ending at 16:00:00 on February 29, 2008:
switch# show accounting log start-time 2008 Feb 1 15:59:59 end-time 2008 Feb 29 16:00:00
Related Commands Command
clear accounting log
OL-16599-01
show accounting log [size] [start-time year month day HH:MM:SS] [end-time year month day
HH:MM:SS]
(Optional) The amount of the log to display in bytes. The range is from 0 to
250000.
(Optional) Specifies a start time. The year argument is in yyyy format. The
month is the three-letter English abbreviation. The day argument range is
from 1 to 31. The HH:MM:SS argument is in standard 24-hour format.
(Optional) Specifies an end time. The year argument is in yyyy format. The
month is the three-letter English abbreviation. The day argument range is
from 1 to 31. The HH:MM:SS argument is in standard 24-hour format.
Modification
This command was introduced.
Description
Clears the accounting log.
Cisco Nexus 5000 Series Command Reference
show accounting log
6-101