Fctimer Distribute - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

fctimer distribute

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fctimer distribute
To enable Cisco Fabric Services (CFS) distribution for Fibre Channel timer (fctimer), use the fctimer
distribute command. To disable this feature, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Command Default Disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the fctimer commit command.
Examples The following example shows how to change the default Fibre Channel timers:
switch(config)# fctimer distribute
Related Commands Command
fctimer commit
show fctimer
Cisco Nexus 5000 Series Command Reference
8-78
fctimer distribute
no fctimer distribute
Modification
This command was introduced.
Description
Commits the Fibre Channel timer configuration changes to the active
configuration.
Displays fctimer information.
Chapter 8 Fibre Channel Commands
OL-16599-01