Fcns Proxy-Port - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Fibre Channel Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcns proxy-port

To register a name server proxy, use the fcns proxy-port command.

Syntax Description

vsan vsan-id

Command Default

Command Modes

Configuration mode

Command History

4.0(0)N1(1a)

Usage Guidelines

One name server can be configured to proxy another name server and name server information can be

displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager.

All name server registration requests come from the same port whose parameter is registered or changed.

If it does not, then the request is rejected.

The following example shows configuring a proxy port for VSAN 2:

switch(config)# fcns proxy-port 21:00:00:e0:8b:00:26:d vsan 2

Related Commands

fcns proxy-port wwn-id vsan vsan-id

no fcns proxy-port wwn-id vsan vsan-id

Specifies the port WWN, with the format hh:hh:hh:hh:hh:hh:hh:hh.

Specifies a VSAN ID. The range is 1 to 4093.

Modification

This command was introduced.

Displays the name server database and statistical information for a specified

VSAN or for all VSANs.

Cisco Nexus 5000 Series Command Reference

fcns proxy-port