Show Fcsp - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fcsp

To display the status of the Fibre Channel Security Protocol (FC-SP) configuration, use the show fcsp
commands.
Syntax Description asciiwwn ascii-wwn
dhchap
database
interface
fc slot/port
vfc vfc-id
statistics
wwn
Command Default None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples
The following example displays DHCHAP configurations in FC interfaces:
switch# show fcsp interface fc2/3
The following example displays DHCHAP statistics for a FC interfaces:
switch# show fcsp interface fc2/3 statistics
The following example displays the FC-SP WWN of the device connected through a specified interface:
switch# show fcsp interface fc 2/1 wwn
The following example displays hash algorithm and DHCHAP groups configured for the local switch:
switch# show fcsp dhchap
The following example displays the DHCHAP local password database:
switch# show fcsp dhchap database
OL-16599-01
show fcsp [asciiwwn ascii-wwn | dhchap [database] | interface {fc slot/port | vfc vfc-id} [statistics
| wwn]]
(Optional) Displays the ASCII representation of the WWN used with AAA
server.
(Optional) Displays the DHCHAP hash algorithm status.
(Optional) Displays the contents of the local DHCHAP database.
(Optional) Displays the FC-SP settings for a Fibre Channel or Fibre Channel
interface.
Specifies a Fibre Channel interface.
(Optional) Specifies a virtual Fibre Channel interface.
(Optional) Displays the statistics for the specified interface.
(Optional) Displays the FC-SP identity of the other device.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show fcsp
9-25