Speed - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

speed

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
speed
To configure the transmit and receive speed for the console port, use the speed command. To revert to
the default, use the no form of this command.
Syntax Description
speed
Command Default
The default console port speed is 9600 bits per second.
Command Modes Terminal line configuration
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can configure the console port only from a session on the console port.
Examples This example shows how to configure the speed for the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# speed 57600
This example shows how to revert to the default speed for the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# no speed 57600
Related Commands Command
line console
show running-config
Cisco Nexus 5000 Series Command Reference
1-112
speed speed
no speed speed
Speed in bits per second. Valid speeds are 300, 1200, 2400, 4800, 9600,
19200, 38400, 57600, or 115200.
Modification
This command was introduced.
Description
Enters the console terminal configuration mode.
Displays the running configuration.
Chapter 1 Basic System Commands
OL-16599-01