Vrf Policy Deny - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

vrf policy deny

To enter virtual forwarding and routing instance (VRF) policy configuration mode for a user role, use
the vrf policy deny command. To revert to the default VRF policy for a user role, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes User role configuration.
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to enter VRF policy configuration mode for a user role:
switch(config)# role name MyRole
switch(config-role)# vrf policy deny
switch(config-role-vrf)#
This example shows how to revert to the default VRF policy for a user role:
switch(config)# role name MyRole
switch(config-role)# no vrf policy deny
Related Commands Command
role name
show role
OL-16599-01
vrf policy deny
no vrf policy deny
Modification
This command was introduced.
Description
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
Cisco Nexus 5000 Series Command Reference
vrf policy deny
6-151