Policy-Map Type Qos - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

policy-map type qos

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
policy-map type qos
To create or modify a policy map and enter the policy map type qos configuration mode, use the
policy-map type qos command. To remove a policy map, use the no form of this command.
Syntax Description
match-first
qos-policy-map-name
Defaults
The software enters the policy map type qos configuration mode if you enter the policy-map command
without specifying a type.
Command Modes
Global configuration
Command History Release
4.1(3)N1(1)
Usage Guidelines
Use the
This command does not require a license.
Examples This example shows how to create or modify a type qos policy map:
switch(config)# policy-map my_policy1
switch(config-pmap-qos)#
This example shows how to remove a type qos policy map:
switch(config)# no policy-map my_policy1
Related Commands Command
service-policy
show policy-map
Cisco Nexus 5000 Series Command Reference
5-16
policy-map [type qos] [match-first] qos-policy-map-name
no policy-map [type qos] [match-first] qos-policy-map-name
(Optional) Specifies that policies associated with the first class that
matches the packet characteristics are executed. This is the default action
if this option is not specified.
Note
Name assigned to a type qos policy map.
Modification
This command was introduced.
service-policy command to assign policy maps to interfaces.
Description
Attaches a policy map to an interface.
Displays policy maps and statistics.
Because this is the default action, you do not need to enter this
variable; it is here to ensure compatibility with other systems.
Chapter 5 Quality of Service Commands
OL-16599-01