Description (User Role) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

description (user role)

To configure a description for a user role, use the description command. To revert to the default, use the
no form of this command.
Syntax Description
text
Command Default
None
Command Modes User role configuration
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can include blank spaces in the user role description text.
Examples This example shows how to configure the description for a user role:
switch(config)# role name MyRole
switch(config-role)# description User role for my user account.
This example shows how to remove the description from a user role:
switch(config)# role name MyRole
switch(config-role)# no description
OL-16599-01
description text
no description
Text string that describes the user role. The maximum length is 128
characters.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
description (user role)
6-37