Show Interface Fex-Intf - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 4 Fabric Extender Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show interface fex-intf

To display the host interfaces pinned to a fabric interface, use the show interface fex-intf command.
Syntax Description
interface
Command Default None
Command Modes EXEC mode
Command History Release
4.0(1a)N2(1)
Examples This example shows how to display the host interfaces pinned to an Ethernet fabric interface on the
parent switch:
switch# show interface ethernet 1/1 fex-intf
This example shows how to display the host interfaces pinned to an EtherChannel fabric interface on the
parent switch:
switch# show interface port-channel 1 fex-intf
Related Commands Command
show fex
OL-16599-01
show interface interface fex-intf
Ethernet or EtherChannel interface.
Modification
This command was introduced.
Description
Displays all configured Fabric Extender chassis connected to the switch.
Cisco Nexus 5000 Series Command Reference
show interface fex-intf
4-19