Show Logging Logfile - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show logging logfile

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show logging logfile
Use the show logging logfile command to display the messages in the log file that were timestamped
within the span entered. If you do not enter an end time, the current time is used.
Syntax Description start-time
end-time
Command Default None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to display the messages in the log file that were timestamped within the span
shown:
switch# show logging logfile start-time 2008 mar 11 12:10:00
Related Commands Command
logging logfile
Cisco Nexus 5000 Series Command Reference
7-28
show logging logfile [start-time yyyy mmm dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss]
(Optional) Enter a start time in the format yyyy mmm dd hh:mm:ss. Use three
characters for the month (mmm) field, digits for the year (yyyy) and day (dd)
fields, and digits separated by colons for the time (hh:mm:ss) field.
(Optional) Enter an end time in the format yyyy mmm dd hh:mm:ss. Use three
characters for the month (mmm) field, digits for the year (yyyy) and day (dd)
fields, and digits separated by colons for the time (hh:mm:ss) field.
Modification
This command was introduced.
Description
Configures logging to a log file.
Chapter 7 System Management Commands
OL-16599-01