Show System Reset-Reason - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show system reset-reason

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show system reset-reason
To display the reset history for the switch, use the show system reset-reason command.
Syntax Description
fex chassis_ID
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
4.0(1a)N2(1)
Examples
This example shows how to display the reset-reason history for the switch:
switch# show system reset-reason
This example shows how to display the reset-reason history for an attached Fabric Extender:
switch# show system reset-reason fex 101
Cisco Nexus 5000 Series Command Reference
1-106
show system reset-reason [fex chassis_ID]
(Optional) Specifies the Fabric Extender chassis ID. Chassis ID is 100 to
199.
Modification
This command was introduced.
This command was modified to provide Fabric Extender support.
Chapter 1 Basic System Commands
OL-16599-01