Fabric-Binding Database Vsan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Chapter 8
Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fabric-binding database vsan

To configure a user-specified fabric binding list in a VSAN, use the fabric-binding database vsan
command. To disable the fabric binding, use the no form of the command.
Syntax Description
vsan vsan-id
swwn switch-wwn
domain domain-id
Command Default
None
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
Fabric binding is configured on a per-VSAN basis. In a Fibre Channel VSAN, only the switch world
wide name (sWWN_ is required; the domain ID is optional.
A user-specified fabric binding list contains a list of switch WWNs (sWWNs) within a fabric. If an
sWWN attempts to join the fabric and that sWWN is not on the list, or the sWWN is using a domain ID
that differs from the one specified in the allowed list, the ISL between the switch and the fabric is
automatically isolated in that VSAN and the switch is denied entry into the fabric.
Examples
The following example enters the fabric binding database mode and adds the sWWN and domain ID of
a switch to the configured database list:
switch(config)# fabric-binding database vsan 5
switch(config-fabric-binding)# swwn 21:00:05:30:23:11:11:11 domain 102
The following example deletes a fabric binding database for the specified VSAN:
switch(config)# no fabric-binding database vsan 10
The following example deletes the sWWN and domain ID of a switch from the configured database list:
switch(config)# fabric-binding database vsan 5
switch(config-fabric-binding)# no swwn 21:00:15:30:23:1a:11:03 domain 101
OL-16599-01
fabric-binding database vsan vsan-id
swwn switch-wwn domain domain-id
fabric-binding database vsan vsan-id
no swwn switch-wwn domain domain-id
no fabric-binding database vsan vsan-id
Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Configures the switch WWN in dotted hex format.
Specifies the specified domain ID. The domain ID is a number from 1 to 239.
Modification
This command was introduced.
fabric-binding database vsan
Cisco Nexus 5000 Series Command Reference
8-41

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?

Questions and answers

Table of Contents