Show Fdmi - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show fdmi

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show fdmi
To display the Fabric-Device Management Interface (FDMI) database information, use the show fdmi
command.
Syntax Description database
detail
hba-id hba-id
vsan vsan-id
suppress-updates
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays all HBA management servers:
switch# show fdmi database
The following example displays VSAN1-specific FDMI information:
switch# show fdmi database detail vsan 1
The following example displays details for the specified HBA entry:
switch# show fdmi database detail Hba-id 21:01:00:e0:8b:2a:f6:54 vsan 1
Cisco Nexus 5000 Series Command Reference
9-28
show fdmi database [detail [hba-id {hba-id vsan vsan-id} | vsan vsan-id] | vsan vsan-id] |
suppress-updates
Displays the FDMI database contents.
(Optional) Specifies detailed FDMI information.
(Optional) Displays detailed information for the specified HBA entry.
(Optional) Specifies FDMI information for the specified VSAN. The range
is 1 to 4093.
Displays the VSANs that are configured to suppress updates.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01