Feature Fcoe - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

feature fcoe

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
feature fcoe
To enable virtual and native Fibre Channel interfaces after installing the FC_FEATURES_PKG license,
use the feature fcoe command. To disable Fibre Channel interfaces and return the FC_FEATURES_PKG
license to the license manager software, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Command Default
FCoE is disabled.
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
You must save the configuration, and then reboot the switch to enable or disable the FCoE feature.
Examples
This example shows how to enable FCoE on the switch:
switch(config)# feature fcoe
Related Commands
Command
fcoe mode
Cisco Nexus 5000 Series Command Reference
1-38
feature fcoe
no feature fcoe
Modification
This command was introduced.
Description
Creates a VLAN interface.
Chapter 1
Basic System Commands
OL-16599-01

Advertisement

Table of Contents
loading

Table of Contents