Exit (Global) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

exit (global)

To exit any configuration mode to the next highest mode in the CLI mode hierarchy, use the exit
command in any configuration mode.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
All configuration modes
Command History Release
4.0(0)N1(1a)
Usage Guidelines
Use the exit command in configuration mode to return to EXEC mode. Use the exit command in
interface, VLAN, or zone configuration mode to return to configuration mode. At the highest level,
EXEC mode, the exit command will exit the EXEC mode and disconnect from the switch (see the
description of the
Examples The following example shows how to exit from the interface configuration mode and to return to the
configuration mode:
switch(config-if)# exit
switch(config)#
Related Commands Command
end
exit (EXEC)
OL-16599-01
exit
Modification
This command was introduced.
exit (EXEC)
Description
Ends your configuration session by exiting to privileged EXEC mode.
Terminates the active terminal session by logging off the router.
command for details).
Cisco Nexus 5000 Series Command Reference
exit (global)
1-37