Show Inventory - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show inventory

To display the physical inventory information for the switch hardware, use the show inventory
command.
Syntax Description fex chassis_ID
Command Default
Displays all hardware inventory information.
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
4.0(1a)N2(1)
Examples
This example shows how to display the switch hardware inventory information:
switch# show inventory
This example shows how to display the hardware inventory information for an attached Fabric Extender:
switch# show inventory fex 101
Related Commands Command
show hardware
internal
show module
OL-16599-01
show inventory [fex chassis_ID]
(Optional) Specifies the Fabric Extender chassis ID. Chassis ID is 100 to
199.
Modification
This command was introduced.
This command was modified to provide Fabric Extender support.
Description
Displays information about the physical hardware.
Displays information about the modules.
Cisco Nexus 5000 Series Command Reference
show inventory
1-87