Class-Map - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

class-map

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
class-map
To create or modify a class map and enter the class-map configuration mode, use the class-map
command. To remove a class map, use the no form of this command.
Syntax Description
class-map-name
Command Default None
Command Modes Global configuration.
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can define a class map for each class of traffic to be used in QoS policies.
Examples This example shows how to create or modify a class map:
switch(config)# class-map my_class1
switch(config-cmap)#
This example shows how to remove a class map:
switch(config)# no class-map my_class1
Related Commands Command
policy-map
show class-map
Cisco Nexus 5000 Series Command Reference
5-2
class-map class-map-name
no class-map class-map-name
Name assigned to the class map. The name class default is reserved.
Modification
This command was introduced.
Description
Creates or modifies a policy map.
Displays class maps.
Chapter 5 Quality of Service Commands
OL-16599-01