Feature Interface-Vlan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

feature interface-vlan

To enable the creation of VLAN interfaces, use the feature interface-vlan command. To disable the
VLAN interface feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default VLAN interfaces are disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines You must use the feature interface-vlan or the
interfaces.
Examples This example shows how to enable the interface VLAN feature on the switch:
switch(config)# feature interface-vlan
Related Commands Command
interface vlan
OL-16599-01
feature interface-vlan
no feature interface-vlan
Modification
This command was introduced.
Description
Creates a VLAN interface.
svi enable command before you can create VLAN
Cisco Nexus 5000 Series Command Reference
feature interface-vlan
1-39