Show Interface Priority-Flow-Control - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 5 Quality of Service Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show interface priority-flow-control

To display the priority flow control details for a specified interface, use the show interface
priority-flow-control command.
Syntax Description name
Command Default
None
Command Modes Global configuration.
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the priority flow control details for a specified interface:
switch(config)# show interface ethernet 1/1 priority-flow-control
---------------------------------------
Port
---------------------------------------
Eth1/1
The interface specified is Ethernet 1/1, the PFC mode is set to negotiate PFC capability, the operation is
off and packets transmitted is zero.
Related Commands Command
priority-flow-control
OL-16599-01
show interface [name] priority-flow-control
(Optional) Name of the interface.
Modification
This command was introduced.
Mode Oper RxPPP
auto off 0
Description
Sets the PFC mode for the selected interface.
TxPPP
0
Cisco Nexus 5000 Series Command Reference
show interface priority-flow-control
5-25