Switchport Mode Private-Vlan Promiscuous - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 2 Ethernet Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

switchport mode private-vlan promiscuous

To set the interface type to be a promiscuous port for a private VLAN, use the switchport mode
private-vlan promiscuous command.
Syntax Description This command has no keywords or arguments.
Command Default
None
Command Modes
Interface configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
When you configure a port as a promiscuous private VLAN port and one of the following applies, the
port becomes inactive:
•
•
If you delete a private VLAN port mapping or if you configure a private port as a SPAN destination, the
deleted private VLAN port mapping or the private port that is configured as a SPAN destination becomes
inactive.
See the
Examples
This example shows how to set a port to promiscuous mode for private VLANs:
switch(config-if)# switchport mode private-vlan promiscuous
Related Commands Command
show interface
switchport
OL-16599-01
switchport mode private-vlan promiscuous
Modification
This command was introduced.
The port does not have a valid private VLAN mapping configured.
The port is a Switched Port Analyzer (SPAN) destination.
private-vlan command for more information on promiscuous ports.
Description
Displays information on all interfaces configured as switch ports.
switchport mode private-vlan promiscuous
Cisco Nexus 5000 Series Command Reference
2-95