Switchport Mode Private-Vlan Host - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

switchport mode private-vlan host

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
switchport mode private-vlan host
To set the interface type to be a host port for a private VLAN, use the switchport mode private-vlan
host command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
Interface configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
When you configure a port as a host private VLAN port and one of the following applies, the port
becomes inactive:
•
•
•
If you delete a private VLAN port association, or if you configure a private port as a SPAN destination,
the deleted private VLAN port association or the private port that is configured as a SPAN destination,
that port becomes inactive.
Note We recommend that you enable spanning tree BPDU Guard on all private VLAN host ports.
Examples This example shows how to set a port to host mode for private VLANs:
switch(config-if)# switchport mode private-vlan host
Related Commands Command
show interface
switchport
Cisco Nexus 5000 Series Command Reference
2-94
switchport mode private-vlan host
Modification
This command was introduced.
The port does not have a valid private VLAN association configured.
The port is a Switched Port Analyzer (SPAN) destination.
The private VLAN association is suspended.
Description
Displays information on all interfaces configured as switch ports.
Chapter 2 Ethernet Commands
OL-16599-01