Show Tacacs-Server - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show tacacs-server

To display TACACS+ server information, use the show tacacs-server command.
Syntax Description hostname
ipv4-address
ipv6-address
directed-request
groups
sorted
statistics
Defaults Displays the global TACACS+ server configuration.
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines TACACS+ preshared keys are not visible in the show tacacs-server command output. Use the show
running-config tacacs+ command to display the TACACS+ preshared keys.
You must use the feature tacacs+ command before you can display TACACS+ information.
Examples
This example shows how to display information for all TACACS+ servers:
switch# show tacacs-server
This example shows how to display information for a specified TACACS+ server:
switch# show tacacs-server 10.10.2.2
This example shows how to display the TACACS+ directed request configuration:
switch# show tacacs-server directed-request
OL-16599-01
show tacacs-server [hostname | ip4-address | ip6-address] [directed-request | groups | sorted |
statistics]
(Optional) TACACS+ server Domain Name Server (DNS) name. The
maximum character size is 256.
(Optional) TACACS+ server IPv4 address in the A.B.C.D format.
(Optional) TACACS+ server IPv6 address in the X:X:X::X format.
(Optional) Displays the directed request configuration.
(Optional) Displays information about the configured TACACS+ server
groups.
(Optional) Displays sorted-by-name information about the TACACS+
servers.
(Optional) Displays TACACS+ statistics for the TACACS+ servers.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show tacacs-server
6-119