Fcalias Name - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcalias name

To configure a Fibre Channel alias, use the fcalias name command. To disable a Fibre Channel alias,
use the no form of the command.
Syntax Description
alias-name
vsan
vsan-id
Command Default None
Command Modes
Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines To include multiple members in any alias, use the FCID, fWWN, or pWWN values.
Examples
The following example shows how to configure an fcalias called AliasSample on VSAN 3:
switch(config)# fcalias name AliasSample vsan 3
switch(config-fcalias)#
Related Commands Command
member (fcalias
configuration mode)
OL-16599-01
fcalias name alias-name vsan vsan-id
no fcalias name alias-name vsan vsan-id
The name of the fcalias. Maximum length is 64 characters.
The fcalias is for a VSAN.
The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Configures alias members for a specified zone.
Cisco Nexus 5000 Series Command Reference
fcalias name
8-45