Fabric-Binding Database Diff - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

fabric-binding database diff

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
fabric-binding database diff
To view the differences between the active database and the configuration database in a VSAN, use the
fabric-binding database diff command.
Syntax Description active
config
vsan vsan-id
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
Examples The following example displays the differences between the active database and the configuration
database in VSAN 1:
switch# fabric-binding database diff active vsan 1
The following example displays information about the differences between the configuration database
and the active database:
switch# fabric-binding database diff config vsan 1
Related Commands Command
fabric-binding copy
Cisco Nexus 5000 Series Command Reference
8-40
fabric-binding database diff {active | config} vsan vsan-id
Provides information about the differences in the active database relating to
the configuration database.
Provides information about information on the differences in the
configuration database relating to the active database.
Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Description
Copies from the active to the configuration fabric binding database.
Chapter 8 Fibre Channel Commands
OL-16599-01