Ssh - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

ssh

To create a Secure Shell (SSH) session using IPv4, use the ssh command.
Syntax Description
username
ipv4-address
hostname
vrf vrf-name
Command Default Default VRF.
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
The switch supports SSH version 2.
Examples
This example shows how to start an SSH session using IPv4:
switch# ssh 10.10.1.1 vrf management
Related Commands Command
clear ssh session
ssh server enable
ssh6
OL-16599-01
ssh [username@]{ipv4-address | hostname} [vrf vrf-name]
(Optional) Username for the SSH session.
IPv4 address of the remote host.
Hostname of the remote host.
(Optional) Specifies the VRF name to use for the SSH session.
Modification
This command was introduced.
Description
Clears SSH sessions.
Enables the SSH server.
Starts an SSH session using IPv6 addressing.
Cisco Nexus 5000 Series Command Reference
ssh
6-127